Akron 9301 운영 지침 - 페이지 5

{카테고리_이름} Akron 9301에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akron 9301 5 페이지. Portable flow meter
Akron 9301에 대해서도 마찬가지입니다: 운영 지침 (3 페이지)

페이지 인쇄

Once CALIBRATE is selected, press ENTER to record the valve size. The unit will automatically assign the flow ranges.

This will complete this step of the initial set up unless a unique plumbing configuration requires Custom Flow Calibration.

For information on Custom Flow Calibration, go to the Akron Brass web site.

www.AkronBrass.com/9315customflowcal

Zero Cutoff is the ability to eliminate nuisance or shadow flow readings of up to 59 units.

The FACTORY DEFAULTS option, if entered, will change a custom flow setting back to the original factory setting.

pressure Menu

The PRESSURE MENU provides the ability to change the pressure range and to add a "zero cutoff" for the pressure. The pressure

range is 0 to 600 psi (0-4000 kPa).

When used with and Akron valve and Navigator, the pressure read out will show zero at powerup. Therefore, custom calibration is not required.

Zero Cutoff is the ability to eliminate nuisance or shadow pressure readings up to 59 units.

The FACTORY DEFAULTS option, if entered, will change a custom pressure setting back to the original factory setting.

DispLaY Menu

The DISPLAY MENU provides the ability to determine "Brightness" and "Contrast".

In this menu when BRIGHTNESS or CONTRACT is selected, the left button becomes NEXT. Use the NEXT button to move either the BRIGHTNESS or

CONTRAST to the desired level. Press the ENTER button to lock in the setting.

sensors

part number

Description

9300-0046

Flow Meter Sensor

9300-0050

Pressure Sensor

ISO 9001 REGISTERED COMPANY

Configure Flow Screen

PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 I akronbrass.com

WARRANTY AND DISCLAIMER: We warrant Akron Brass products for a period of five (5) years after purchase against defects in materials or workmanship. Akron Brass will repair or replace

product which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service.

We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; damage; failure to

follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY

STATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential,

incidental or indirect damages (including, but not limited to, any loss of profits) from any cause whatsoever. No person has authority to change this warranty.

revised: 8/17