CYP CH-527RXVBD 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CH-527RXVBD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-527RXVBD 20 페이지. 4k uhd+ hdmi over hdbaset receiver with bi-directional 24v poc

페이지 인쇄

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

ISP Pinhole: This button is reserved for factory use only.

STD/UPDATE Switch: This switch is reserved for factory use only.

Note: This should be left on the default setting of "STD" for normal

operation.

RS-232 Port: Connect to a PC, laptop, or serial controllable device

for the extension of RS-232 signals between both ends of the

HDBaseT connection.

LAN Port: Connect to an Ethernet supporting device or to your

local network, as appropriate, to extend the network to both ends

of the HDBaseT connection.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

SYNC LED: This LED will illuminate when a live input source is

detected.

UPDATE

STD

SYNC