CYP PUV-1730PLRX-AVLC 운영 매뉴얼 - 페이지 8
{카테고리_이름} CYP PUV-1730PLRX-AVLC에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PUV-1730PLRX-AVLC 17 페이지. Hdbaset hdr receiver (70m) (4k, hdcp2.2m poh, oar, 18gbps)
페이지 인쇄
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
LINK
POWER
1
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED: This LED will illuminate solidly when a live connection with
a compatible Transmitter is active.
2
OPT. IN: Connect to the optical audio output of a device such as a
media player or game console using an appropriate optical cable.
Audio is sent to the Optical Audio Return output on a connected
compatible Transmitter.
3
IR EXTENDER 2: Connect to an IR Extender to extend the IR control
range of devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
4
IR BLASTER 1: Connect to the provided IR Blaster to transmit IR
signals from the other end of the HDBaseT connection to devices
within direct line-of-sight of the IR Blaster.
5
SERVICE: This USB port is reserved for firmware update.
6
RS-232: Connect to a PC, laptop or other serial control device
with a 3-pin adapter cable for the extension of RS-232 signals to
the Transmitter in "Bypass" mode, or for control this unit when in
"Console" mode.
Note: Depending on the controlled device connected to the Transmitter
side, the Tx and Rx pins might need to be reversed.
7
CONSOLE/BYPASS: This switch controls the operational mode of the
RS-232 port. When set to "Bypass", RS-232 signals will be passed to the
connected Transmitter. When set to "Console" the RS-232 port may be
8
OPT. IN
IR EXTENDER 2
IR BLASTER 1
2
3 4
SERVICE
RS-232
CONSOLE/
RX
TX
BYPASS
5
6
7