CYP CH-110TX 운영 매뉴얼 - 페이지 8
{카테고리_이름} CYP CH-110TX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-110TX 12 페이지. Hdmi & ir over cat6 extender
페이지 인쇄
6.2 Receiver Front and Rear Panels
IR IN
HDMI OUT
1
2
1
IR IN: Connect to the IR Extender for IR signal reception. Ensure
that remote being used is within the direct line-of-sight of the IR
extender.
2
HDMI OUT: This slot is to connect the HDMI or DVI input port of your
display such as an HDTV or HD monitor of liked up with another
receiver unit from the same family type to extend a the signal over
long distance.
3
DC 5V: Connect from 5V DC power supply into the unit and
connect the adaptor to an AC outlet
4
SERVICE: This slot is reserved for factory use only.
5
EQ MIN./MAX.: Switch this HDMI equalize wheel from 0~7 to adjust
HDMI signal strength from minimum to maximum.
6
CAT6 IN: Connect the CAT6 input of the Receiver with the CAT6
output of the Transmitter with CAT6 cable. The device will learn the
EDID of the display when the power is connected.
6.3 EQ Selection Chart
Position
0
1
2
3
4
5
6
7
4
DC 5V
3
Transmission Distance
0~5M
5~10M
10~15M
15~20M
20~25M
25~30M
30~35M
35~45M (Default)
EQ
SERVICE
MIN.
MAX.
4
5
CAT6 IN
6