CYP CH-1601TXRX 운영 매뉴얼 - 페이지 11

{카테고리_이름} CYP CH-1601TXRX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-1601TXRX 20 페이지. Hdmi/audio over cat5e/6/7 extender with 48v poh
CYP CH-1601TXRX에 대해서도 마찬가지입니다: 운영 매뉴얼 (15 페이지)

페이지 인쇄
CYP CH-1601TXRX 운영 매뉴얼
the LAN port slot of the equipment device for a total sharing
rate of100Mbps within the link. The yellow LED will illuminate to
represent the link with Transmitter is steady, when it blink irregularly
it represent the link error or when not illuminate it means no link.
The green LED will illuminate to represent the Ethernet speed is with
100Mbit/s.
6
CAT5e/6/7 IN
Connect to the Transmitter unit with CAT5e/6/7 cable for
transmission of all data signals. The yellow LED will illuminate to
represent the link between Transmitter and Receiver is steady,
when it blink irregularly it represent the link error or when not
illuminate it means no link with Receiver. The green LED will
illuminate to represent the PoH activation.
POWER LED
7
This LED will illuminate when the device is connected with power
supply.

6.4 Receiver's Rear Panel

HDMI OUT
ARC
1
1
HDMI OUT
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
2
USB
Connect to USB peripheral devices such as printer, keyboard, flash
driver or ...etc. for data receiving or sending back to Transmitter.
3
POWER LED
This LED will illuminate when device is connected with USB power
supply.
USB
POWER
LINK 1
LINK 2
2
3
4
5
COAX
AUDIO OUT
OUT 2
IN 1
L
6
7
R
COAX
ARC
IN
IN
8
9
6