Ashdown CTM-15 Valve 사용자 설명서 - 페이지 3
{카테고리_이름} Ashdown CTM-15 Valve에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashdown CTM-15 Valve 18 페이지.
Ashdown CTM-15 Valve에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (5 페이지)
페이지 인쇄
ASHDOWN ENGINEERING - CTM 15
FRONT PANEL
INPUT
There is single instrument input which is suitable for both Passive and Active basses.
EQ CONTROLS
Use MIDDLE, BASS and TREBLE controls to effec the overall tone of the sound.
GAIN
This controls the level of the signal sent to the VOLUME section. To achieve a cleaner sound, turn
the GAIN control down and the VOLUME up. To achieve a richer, more distorted sound, turn the
GAIN control up and the MASTER down.
VOLUME
This controls the overall output volume of the amplifier.
VU METER
The VU Meters provides a visual indication of the output level of the amplifier.
CTM 15
USER GUIDE
REAR PANEL
LINE LEVEL DI
This XLR socket is used to connect the amplifier to a low impedance, balanced output on a PA
system or recording mixer.
SPEAKER OUTPUT
There are dedicated 1/4" jack outlets at 8 and 4 ohms speaker cabinet configuration. It is
important that the correct output or outputs are used to match the impedance load of your
cabinets.
POWER/PREHEAT
Use this switch to pre-heat the valves, bringing them u to the correct temperature before
performing.
USER GUIDE