Ashdown JOHN MYUNG DOUBLE DRIVE 사용자 설명서 - 페이지 3

{카테고리_이름} Ashdown JOHN MYUNG DOUBLE DRIVE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashdown JOHN MYUNG DOUBLE DRIVE 17 페이지.

ASHDOWN ENGINEERING - DOUBLE DRIVE

TOP PANEL

VU METER 1

This is used to monitor the input level of your instrument. The Left Blue LED lights up

in the VU when DRIVE 1 is selected.

VU METER 2

This is used to monitor the output level of the pedal. The VU Blue LED lights up

when DRIVE 2 is selected.

DOUBLE DRIVE

USER GUIDE

GAIN

This is used to set the overall amount of distortion for Drive 1.

LOUD

This is used to set the overall output of Drive 1, set to off and no sound will be

heard.

TONE

This controls the tone of the drive, add more for a trebley sound, less for a bassier

tone.

GRIT

This is used to set the overall amount of distortion for Drive 2.

BURN

This is used to set the overall output of Drive 2, set to off and no sound will be

heard.

DRIVE 1 SWITCH

Use this foot switch to engage Drive.1.

DRIVE 2 SWITCH

Use this foot switch to engage Drive. 2. You can stack the drives on top of each other

by turning both foot switches on, for even more overdriven sounds.

GROUND LIFT SWITCH

The ground lift switch eliminates unwanted hum and buzz if you are plugging into

noisy mains power.

USER GUIDE