CYP CH-506RXPL 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP CH-506RXPL에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-506RXPL 16 페이지. Hdmi to cat5e/6 extender
CYP CH-506RXPL에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

6.2 Receiver Front and Rear Panels

Power

Link

Lite

1 2

Power LED

This LED will illuminate when the device is connected from the

Transmitter with power supply.

LINK LED

This LED will illuminate when the devices are connected with a CAT5e/6

cable from the Transmitter side. When the data transmission accrue with

error the LED will be blinking.

CAT5e/6/7 In

Connect to the Transmitter unit with a single CAT5e/6/7 cable for

transmission of all data signals.

RS232 Out

Plug the 3.5Ø to D-Sub 9 pin male cable included in the package and

connect to the device that is to be controlled by RS-232 commands

IR1 Extender

Connect to the supplied IR Extender cable for IR signal reception. Ensure

that remote being used is within the direct line-of-sight of the IR extender.

IR2 Blaster

Plug the IR Blaster included in the package for IR signal sending from the

Receiver side. Place the IR Blaster in direct line-of-sight of the equipment

to be controlled.

CAT 5e /6 In

IR1 Extender

RS232 Out

IR2 Blaster

HDMI Out

4 4