CYP CH-506RXPLBD 운영 매뉴얼 - 페이지 8
{카테고리_이름} CYP CH-506RXPLBD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-506RXPLBD 16 페이지. Hdmi to cat5e/6/7 extender
페이지 인쇄
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Power
Link
1
2
3
1
DC 24V
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. Only 1 side of device require power
supply when both Transmitter and Receiver obtain PoC function.
2
LINK LED
This LED will illuminate when the devices are connected with
a CAT5e/6/7 cable from the Receiver side. When the data
transmission accrue with error the LED will be blinking.
3
Power LED
This LED will illuminate when the devices are connected with power
supply.
4
CAT5e/6 Out
Connect to the Receiver unit with a single CAT5e/6/7 cable for
transmission of all data signals.
5
RS232 In
Plug the 3.5Ø to D-Sub 9-pin female cable included in the
package and connect to a PC or laptop for RS-232 commands
transmission.
6
IR2 Extender
Connect to the supplied IR Extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR Extender.
7
IR1 Blaster
Plug the IR Blaster included in the package for IR signal sending
from the Receiver side.
3
CAT 5e /6/7 Out
4
IR2 Extender
RS-232 In
IR1 Blaster
5
6
7
HDMI In
Transmitter
8