CYP CH-514TXL 사용 설명서 - 페이지 9

{카테고리_이름} CYP CH-514TXL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-514TXL 16 페이지. Hdbaset lite hdmi over single cat5e/6/7 extender
CYP CH-514TXL에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지)

페이지 인쇄
CYP CH-514TXL 사용 설명서

6.2 Receiver Front and Rear Panels

IR1 IN
1
1
IR1 IN: Connect the supplied IR extender cable for IR signal
reception and transmission to IR1 OUT on the transmitter unit.
Ensure that the remote control being used is within the direct line-
of-sight of the IR extender.
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
2
the HDMI input source signal.
IR2 OUT: Connect to the supplied IR blaster for IR signal transmission to
3
the display equipment. Place the IR blaster in direct line-of-sight of
the equipment to be controlled.
DC 5V: Connect the 5V DC power supply to the unit and plug the
4
adaptor into an AC outlet.
5
CAT5e/6 IN: Connect to the transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals. The yellow LED will illuminate
when both the transmitter and receiver are connected and are
powered. The green LED will illuminate when the device is connected
to the power supply.
HDMI OUT
IR2 OUT
2
3
DC 5V
CAT5e/6 IN
4
5
4