Akron 8601B 운영 매뉴얼 - 페이지 13

{카테고리_이름} Akron 8601B에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akron 8601B 20 페이지. Childs tilttable
Akron 8601B에 대해서도 마찬가지입니다: 서비스 매뉴얼 (14 페이지)

6. Maintenance

Check table visually before use.

Carry out routine servicing every six months or more frequently if in heavy use.

Routine servicing or repair must only be performed by suitably qualified person.

Before commencing any maintenance activity, disconnect the table from the

Examine the table for any signs of damage. Make sure that all nuts, bolts and other fasteners are tight. Do

not over tighten as this may cause binding.

Upholstery fasteners should be checked, tightened or replaced if necessary.

Check section hinge pins to ensure that no pin protrudes.

Check gas strut controls, throughout the full range of movement for locking and assistance.

Check hydraulic tables for smooth operation and signs of leakage.

All electrical checks should be performed by a suitably qualified and licensed

Neither BLUE or BROWN wires are to be connected to the earth terminal of a

Examine the flexible cables for cuts, abrasions, kinking or other deterioration and replace if necessary.

Ensure that the power supply connector plug is securely attached.

Check mains plug connections are tight and fuse is correctly rated (5A).

AKRON 8601B

WARNING

electrical supply.

Plug acts as disconnect device.

WARNING

electrician.

three pin plug.