ASHE STL-96 운영 매뉴얼 - 페이지 9

{카테고리_이름} ASHE STL-96에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASHE STL-96 17 페이지. Stream selector six channel

Enter the number 02 into the Select Menu by using INC key in the PARAMETER SETTING MODE

SCREEN.

Press theMODE key to enter into Input Range Mode.After pressing theMODE key, the OLED Display

shows :

Press theSHIFT key to move the cursor to the last digit.Enter the Password 0004 by using theINC key

and then press MODE key to confirm. After pressing MODE key the OLED Display will show

The customer can set the resolution and display range for each stream individually.

Use theINCkey to select the desired decimal point for display process value.

Press theMODE key to proceed further. After pressing theMODE key, the microcontroller will save the

settings. Setthe decimal point for stream number 01 and move to the low range setting.

Use theSHIFT key to shift the cursor to desired digit and theINC key to change the desired digit from 0

to 9.

Press theMODE key to save the lower range for Stream no. 01 and move to high range setting.

Use theSHIFT key to shift cursor to desired digit and INC key to change the desired digit from 0 to 9.

Press theMODE key to save higher range for stream no. 01 and move to the next parameter.

After pressing MODE key the OLED Display will show:

Password

0000

Set Resolution 01

1234

Set Low range 01

0000

Set High range 01

1000

Set Resolution 02

1234

ASHE CONTROLS PRIVATE LIMITED.

STL-96

TREAM

ELECTOR

Operation Manual