CYP PU-1107-KIT 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP PU-1107-KIT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-1107-KIT 16 페이지. Pure digital hdmi over single cat6 extender set, repeatable version
CYP PU-1107-KIT에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)

페이지 인쇄

6.2 Receiver Front and Rear Panels

CAT6 IN

MIN.

MAX.

EQ MIN./MAX.: Turn the 'EQ' equalization wheel from 0~7 to optimize

the HDMI signal strength according to the transmission length

required.

CAT6 IN: Connect to a compatible single CAT6 transmitter device

attached to a source device by HDMI (see Section 8.2).

DC 5V: Connect the 5V DC power supply to the unit and plug the

adaptor into an AC outlet.

HDMI OUTPUT: Connect to the HDMI or DVI input (with a HDMI to

DVI adaptor) of a display such as an HDTV/HD monitor or connect

to a compatible transmitter (see Section 8.2) in order to extend the

transmission distance.

Note:

A. Cable tested with CAT6/23AWG/Solid cable, results may vary with cables

of another specifcation.

B. Equipment used in cable distance testing included: PS3 120G, 37" Philips

8-bit LCD TV and 40" Samsung 12-bit LCD TV.

C. The figures provided in this manual are for reference only; actual

performance may depend on the source and display used as well as the

cable specification.

DC 5V

HDMI OUT