CYP PU-514L-KIT 운영 매뉴얼 - 페이지 9
{카테고리_이름} CYP PU-514L-KIT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-514L-KIT 16 페이지. Cyp pu-514l-kit v1.4 hdmi over single cat5e/6/7 hdbaset lite with 2-way ir (up to 60m)
페이지 인쇄
6.2 Receiver Front and Rear Panels
1
1
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
2
CAT5e/6/7 IN: Connect to the transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals. The yellow LED will illuminate
when both the transmitter and receiver are connected and are powered.
The green LED will illuminate when the device is connected to the power
supply.
3
IR1 IN/Receiver: Connect the supplied IR receiver cable for IR signal
reception and transmission to IR1 OUT on the transmitter unit. Ensure
that the remote control being used is within the direct line-of-sight of
the IR receiver.
4
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
5
IR2 OUT/Emitter: Connect the supplied IR emitter for IR signal
transmission to the source equipment location from the IR1 OUT on
the transmitter unit. Place the IR emitter in direct line-of-sight of the
equipment to be controlled.
2
3
4
5
9