CYP CDPS-UA1H4HS 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CDPS-UA1H4HS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CDPS-UA1H4HS 12 페이지. 1 by 4 hdmi uhd splitter

6.2 Rear Panel

HDMI IN

HDMI IN: Connect from source equipment such as Blu-ray/DVD/

PS3 players, Set-Top-Box or any HDMI equipped source device for

input signal sending.

HDMI OUT 1~4: Connect to HDMI TV/display or HD Amplifier for

output image and or audio display.

EDID STD/TV: Switch this switch to set HDMI EDID's setting.

Switch to TV mode allows the device to detect HDMI OUT 1's EDID.

For example, when input source support 4K2K contents and output

1 also connected with 4K2K display. The device will send 4K2K

contents to output 1~4 however, if output 2~4 are connected to

non-4K2K TV/monitor then port 2~4 may have no image display

therefore, to ensure all outputs obtain image display OUT 2~4's

EDID must obtain the equivalent EDID to OUT 1.

Switch to STD mode the EDID will support 1080p for video and PCM

2CH for audio.

FIRMWARE: This slot is reserved for firmware update use only.

DC 5V: Connect the adaptor included in the package and

connect to AC wall outlet for power supply.

HDMI OUT

EDID

STD TV

DC 5V

FIRMWARE