Ashford KIWI 2 SPINNING WHEEL 매뉴얼 - 페이지 12

{카테고리_이름} Ashford KIWI 2 SPINNING WHEEL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashford KIWI 2 SPINNING WHEEL 13 페이지.
Ashford KIWI 2 SPINNING WHEEL에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

페이지 인쇄
Ashford KIWI 2 SPINNING WHEEL 매뉴얼
35cm (13¾")
Insert the end of the flyer shaft into the rear flyer bearing and click the flyer orifice into the front flyer
bearing.
Tie the nylon brake band to spring
. Thread the nylon brake band through the eye and tie spring
35cm (13 ¾") from spring
, then cut the surplus nylon off and tie it to the other end of spring
.
Take the nylon brake band up and over the groove in the bobbin and place spring
onto the hook.
Insert the tension knob into the maiden bar, thread the end of the nylon brake band through the hole in
the tension knob and tie a knot. Turn the tension knob to wind on excess nylon.
Take care not to over-stretch the springs.