CYP CLUX-18S 운영 매뉴얼 - 페이지 5

{카테고리_이름} CYP CLUX-18S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CLUX-18S 8 페이지. Cyp clux-18s 1x8 hdmi 1.3 splitter
CYP CLUX-18S에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지)

페이지 인쇄

3.2 Rear Panel

HDMI IN

EDID

STD

1 EDID Control Jumper: Default factory setting is TV, leave as is if the display

is properly. Switch to STD to use build-in EDID if the display has problems.

When the EDID control jumper in TV selection, the unit will detect the first

HDMI output source's EDID and record in the unit. If the first detected

output source is DVI it will pass to next source, until the first HDMI been

detected.

2 HDMI Input: Connect input port to the HDMI or DVI output of your source

equipment such as DVD player or set-top-box.

3 HDMI Outputs 1 to 8: Connect each of the output ports to the HDMI

display. When more than one output connected, the HDMI outputs play

identical video signal simultaneously.

4 Power: Plug the 5V DC power supply into the splitter and connect the

adaptor to AC wall outlet.

HDMI OUT

DC 5V