CYP CLUX-4M 운영 매뉴얼 - 페이지 6
{카테고리_이름} CYP CLUX-4M에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CLUX-4M 8 페이지. 1x4 hdmi 1.3 with multi-channels splitter
CYP CLUX-4M에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지)
페이지 인쇄
6. Operation Controls and Functions
6.1 Front Panel
CLUX-4M
① HDMI Outputs 1: Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
② HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
③ EDID Control switch: STD(INT) and TV (EXT), default setting is TV. When EDID
is on TV: Leave as it is if display is properly, unit will detect the first HDMI
output source's EDID and record in the unit. If the first detected output
source is DVI it will pass to next source until the fist HDMI is been detected.
The detection priority is HDMI v1.3 > v1.2 > DVI.
④ System Reset: Switch to " ON " stage, the system will send the internal CEC
to the display within 8~10 minutes to force all the displays switch to HDMI
1 port. Meanwhile, the source CEC will not functional to the system. When
switch to " OFF " stage, the system reset function will terminate.
⑤ Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
⑥ Power LED Indicator: The LED will illuminate when the power is connected.
⑦ Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
HDMI
OUTPUT
1
HDMI V1.3 Splitter
1
HDMI
INPUT
EDID SYS. Reset
STD
TV ON
2
3
3
SYNC
DC 5V
POWER
OFF
4
5 6
7