CYP DCT-42 운영 매뉴얼 - 페이지 7

{카테고리_이름} CYP DCT-42에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP DCT-42 16 페이지. Mini stereo amplifier 2 x 20w with optical and line level inputs

6. OPERATION CONTROLS AND FUNCTIONS

MUTE

MUTE Button: Press to toggle between muting and unmuting the

audio output.

Note: Press and hold this button for 3 seconds to put the unit into stand-

by mode. Press and hold the button again for 3 seconds to return to

normal operation.

PW LED: This LED will illuminate bright green to indicate the unit is on

and receiving power. When the unit is in stand-by mode the LED will

illuminate dim green.

MUTE LED: This LED will illuminate to indicate the when the audio

output is muted.

SOURCE Button & OPT./LINE IN LEDs: Press this button to toggle

between the line in and optical inputs. The LEDs will illuminate to

indicate which source is currently selected.

VOL −/+ Buttons: Press or hold the −/+ (minus/plus) buttons to

increase or decrease the audio output volume.

VOLUME LEVEL LEDs: These 5 LEDs will illuminate progressively from

left (lowest) to right (highest) to indicate the current output volume

level.

Note: The full volume range is from -80dB to +20dB (100 steps) and the

LEDs will be lit proportionally to this range.

SOURCE

OPT.

VOL

LINE IN

VOLUME LEVEL