CYP QU-210S 운영 매뉴얼 - 페이지 4
{카테고리_이름} CYP QU-210S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP QU-210S 10 페이지. V1.3 hdmi 2 to 10 rack mountable distribution amplifier
CYP QU-210S에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)
페이지 인쇄
3. Operation Controls and Functions
3.1 Front Panel
QU-210S
1. Remote Control Sensor.
2. Key Lock: Press and hold the 'Key Lock' button for 5 seconds. The system will
enter Key Lock mode and the LED indicator will illuminate. When the system is
in Key Lock Mode, all functionality of the buttons will be disabled.
3. HDMI/DVI Indicator: The LED will illuminate when the selected HDMI input is
connected to a HDMI source. The LED will not illuminate when the HDMI input
is connected to a DVI source.
4. HDCP Indicator: The LED indicator will illuminate when the HDMI input source
is HDCP protected.
5. SYNC Indicator: The LED indicator will illuminate when the selected HDMI
Input successfully connects to an HDMI or DVI source.
6. HDMI Output Indicator: The LED will illuminate when the output sources are
connected.
7. HDMI Input Indicator: Press the 'INPUT' button repeatedly to switch your
desired Input (HDMI 1 or HDMI 2). The LED indicator will illuminate to indicate
which input source is selected.
8. POWER Indicator: The Power LED will illuminate in Green when the power is
On, and Red when in Standby Mode.
KEY LOCK
1
2
Page 2
4
HDMI / DVI
HDCP
5
4
3
2
SYNC
OUTPUT
10
9
8
7
3 5
6
1
2
1
INPUT
POWER
6
7
8