DOLFINOS The CARBON Edition 사용자 설명서 - 페이지 7
{카테고리_이름} DOLFINOS The CARBON Edition에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOLFINOS The CARBON Edition 12 페이지.
페이지 인쇄PL E ASE N OT E
The insert screws are micro screws, which
can be damaged easily if they are not treated
carefully. DISCLAIMER: Damaging these
screws makes it difficult to remove the
chinrest for the maintenance of your adapter.
DOLFINOS is not liable for any follow up costs
if you have not followed these instructions.
If you have the impression the rods slip down
despite tightening the screws, we recommend
the following steps:
1. Take the chin rest completely out.
2. Clean the titanium rods with alcohol.
3. Clean the rods holes in the adapter
carefully with a dry interdental brush.
4. Roughen the rods with sandpaper by
turning the sandpaper around the titanium
rods horizontally.
5. If this is not enough, tighten the screws a
bit more. (This mostly must be done with
the left screw of the Venezia chin rest.)
CAR E NOT E
To keep your wooden chin rest clean, remove
it from the adapter, use a small quantity of
natural based skin oil or olive oil and rub and
polish it with a towel or kitchen paper until
the oil is no longer noticeable.
Our chinrests in ABS can be washed with a
mild soap and lukewarm water. After washing
your ABS chinrest you can proceed to treat it
with skin oil or olive oil as described above for
the wooden chinrests.