Cypress CY3633 사용자 설명서 - 페이지 18

{카테고리_이름} Cypress CY3633에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CY3633 20 페이지. Wirelessusb ls gaming dvk

WirelessUSB™ LS Gaming DVK User's Guide

The figure below shows the connections required for Game Controller firmware development.

Figure 10. Game Controller Hardware Configuration for Firmware Development

3.2.2 Compiling and Programming

Copy the Game Controller files along with the lib directory located under the WirelessUSB LS

Gaming DVK directory to a directory on your hard-drive. The steps below are required after copy-

ing the files from CD-ROM in the Software directory to the local hard-drive.

1. Change the file attributes for all of the source files to read/write before proceeding

2. Launch PSoC™ Designer by double clicking on the project file 'gamecontroller.soc'

3. It is important that the pod does not provide power to the development system hardware.

Make sure that Project/Settings/Debugger page is configured for "Pod uses external power

only".

4. Click Config -> Generate Application to build the complete application.

5. In the file /Lib/ADCINCVR_1INT.asm add the following between lines 37 & 38:

"_ADCINCVR_1_bSampC:". Refer to section 5.1 in the release notes. This must be added

every time the application is generated.

6. Click Build -> Start Debug to compile the code and prepare for debugging

7. Click Debug -> Connect in order to establish communication with the PSoC ICE-4000.

8. Click Debug -> Download to Emulator in order to load the code image to the emulator pod.

Page -14

WirelessUSB™ LS Gaming DVK User's Guide Rev 1.1