Cypress CYALKIT-E03 키트 매뉴얼 - 페이지 7

{카테고리_이름} Cypress CYALKIT-E03에 대한 키트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CYALKIT-E03 19 페이지. Solar-powered ble sensor beacon 5 pack

1.2 Block Diagrams



PC based on Windows 7/8.1/10



iOS 8 or newer



Android 4.4 or newer

The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack provides everything needed to develop a light-powered

sensor node that transmits sensor data using Bluetooth Low Energy (BLE):



Tiny solar-powered BLE sensor board (circle with 24-mm diameter, same size as 25-cent coin)



Operates using light energy harvested (>100 lux) by the included solar cell



Supports BLE communication with a mobile device (iOS 8 or newer/Android 4.4 or newer)



Energy harvesting PMIC S6AE103A that supports the following applications:

□

Demo mode, transmitting sensor data at 3- to 60-second intervals (without charging to a supercapacitor)

□

Timer mode, transmitting sensor data at 5-minute intervals while charging to the supercapacitor

□

Transmitting data at over 30 hours without ambient light (when mode is set to Timer mode and supercapacitor is

fully charged)



Solar BLE Sensor that can support the following:

□

Selection of mode using a slide switch (Demo or Timer mode)

□

Programming and debugging of the EZ-BLE module via Debug Board

□

Parameter setting of BLE Beacon via Debug Board

□

Charging of surplus solar energy to a 0.2-F supercapacitor (Timer mode)

CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Doc. No. 002-12543 Rev. *A

Figure 1-2. Block Diagram of Solar BLE Sensor

Introduction