Cypress FM3 Series 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cypress FM3 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress FM3 Series 17 페이지. 32-bit arm cortex - m3 washing machine evaluation board
Cypress FM3 Series에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지)

페이지 인쇄
Cypress FM3 Series 빠른 시작 매뉴얼

1. Demo System

This quick start guide mainly describes how to use the sample project which includes the library functions provided by the
Math and Motor Control Library.
The MMCL is based on the Cypress Cortex-M3 microcontrollers, all of the modules in the MMCL are used in the sample
project that will be described in detail in this guide. You can use this sample project to control the low voltage PMSM or
BLDC.
This chapter introduces one example of inverter motor control project and help you run a motor quickly.

1.1 Demo System Introduction

The connection diagram for the MMCL sample project which is used to control the low voltage inverter motor is shown in
Figure
1-1. The sample project can be adaptive to the any type of low voltage PMSM or BLDC motor.
Figure 1-1. Demo Connection
LVPS
ADPT
DC 24V
U,V,W
Low Voltage Motor

1.2 Hardware Connect

There are 4 lines to be connected to the demo board.
1.
Plug the hall signal of motor to inverter board, shown as below.
FM3 Family Math and Motor Control Library Quick Start Guide, Doc. No. 002-04766 Rev. *A
4