Cypress FM3 Series 매뉴얼 - 페이지 12

{카테고리_이름} Cypress FM3 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress FM3 Series 14 페이지. 32-bit arm cortex - m3 washing machine evaluation board
Cypress FM3 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄
Cypress FM3 Series 매뉴얼
3.2

Over-current Protection Circuit

To prevent the damage to the IPM caused by the unexpected huge current. The system needs over-current
protection circuit
1
Compute the output as follow:
=
∗ �
3
147 + 148
Where:
As mentioned in the specification of IPM, the self-protection function will be trigged if the voltage on the fault pin
is higher than 0.5V. Then, it is easy to calculate and adjust the threshold value that trigs the over-current
protection.
FM3, MB9AF110K, 32-Bit ARM
Figure 6
to detect the current surge.
Figure 6. Over-Current Projection Circuit
148
146
+ 1� ∗ ( )
� ∗ �
145
= voltage to fault pin of IPM
, , = voltage between shunt resisters
®
®
Cortex
- M3 Washing Machine Evaluation Board, Doc. No. 002-04443 Rev. *A
2BHardware
12