Acquisitions X-FIRE 1200 사용자 설명서 - 페이지 4

{카테고리_이름} Acquisitions X-FIRE 1200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acquisitions X-FIRE 1200 15 페이지.

Basic Operation

The X-FIRE 1200 remote control allows you to turn ON and OFF the fire,

control the flame height in the Manual mode, or control the room temperature

in the Thermostat mode. The remote has a maximum range of 10 meters, and

because the remote works by radio frequency, it does not need to be aimed at

the

X-FIRE 1200

for it to operate.

Switching on the X-FIRE 1200

When first powered the remote starts at the OFF screen (it is possible that the

remote is locked in the OFF screen: to unlock it just press the button below

Unlock, and then OK).

Switching on: Once the remote is unlocked, press On (left button) and OK

(middle button). A beep from the control unit will be heard, and the ignition

process starts (the pilot will start sparking and gas will start flowing to the pilot,

which should then be lit within a few seconds).

If the pilot flame fails to ignite, you must turn OFF the

X-FIRE 1200

from the

remote and start the process of turning it ON again.

X-FIRE 1200