Cypress CY3207-ISSP 빠른 시작 매뉴얼

{카테고리_이름} Cypress CY3207-ISSP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CY3207-ISSP 2 페이지. Programmer kit

Install Software

1. Insert the kit CD in the CD drive of your

PC.

2. Install the ISSP Programmer software.

In-System Programming

1. Connect the ISSP cable between the

RJ45 connector of the ISSP board and

the ISSP header on the target board.

2. Initiate programming.

CY3207-ISSP PROGRAMMER KIT

QUICK START GUIDE

Socket Programming

1. Connect the USB cable between the PC

and the programmer.

2. Open the ISSP Programmer and update

the kit firmware.

3. Place the silicon in the ZIF socket; initiate

programming from the ISSP Programmer.

Standalone Programming

1. Unplug the USB cable and plug in the

power cable.

2. Place the silicon in the ZIF socket and

press the Program button to initiate

programming.

Note: See the user guide for more

information on programming modes.