Cypress CY3641 빠른 시작 매뉴얼

{카테고리_이름} Cypress CY3641에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CY3641 2 페이지. Programming kit

CY3642 PROGRAMMING KIT

The CY3642 Programming Kit enables quick and easy Programming of Cypress's

High Performance Programmable Oscillator (CY29421, CY29422)

• Download and install the latest kit software onto

your PC from

www.cypress.com/CY364X

• Connect the board to your PC using the provided

USB cable

• The Status LED (Green) turns ON after the kit

driver enumeration is complete

QUICK START GUIDE

Steps to successfully program the clock device using

this Programming kit.

• Ensure default Jumper setting as mentioned in

Table overleaf

• Run the Clock Programmer software tool

1. Select CY294xx from the Device List

2. Select 0x55 for target I

3. Click Connect

4. Open the JEDEC le from <Install_Directory>

\CY364x Programming Kit\<version>\Firmware\

CY3642\CY3642 Kit LVPECL 2.5V 156.25MHz)

5. Click Program

• While eFuse programming is underway you

will notice Power LED (LED2) to glow Amber

Kit Contents:

1. CY3642 Programming Board

2. USB Standard-A to Mini-B cable

3. Quick Start Guide (this document)

4. IC CY29422FLXI

(placed inside the socket)

C address