Cloud CA2500 기술 게시판 - 페이지 9

{카테고리_이름} Cloud CA2500에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Cloud CA2500 13 페이지.
Cloud CA2500에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (19 페이지)

Procedure for removing and replacing a PSU module

Observe the following procedure for removing a PSU module from the amplifier, prior to replacement, or

during diagnostics:

1. Ensure the PSU rails are fully discharged, using the above discharge procedure.

2. Remove the 3-pin AC mains connector from the input of the PSU. Squeeze the connector to compress and

open the clip, and then pull upwards on the connector body to disconnect it.

3. Remove the 4-pin high-voltage DC supply connector from the PSU. Squeeze the connector to compress

and open the clip, and then pull upwards on the connector body to disconnect it.

4. Remove the 15-pin low-voltage DC supply and control connector from the PSU. This can be removed by

pulling gently on the black cables at either side of the connector body, to lift it vertically out of the socket.