Cloud Contractor CVS Series 설치 매뉴얼 - 페이지 3

{카테고리_이름} Cloud Contractor CVS Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cloud Contractor CVS Series 6 페이지. Pendant loudspeakers

SET UP AND OPERATION

This speaker is designed to hang from the ceiling. A safety cable should be used when installing the speakers to

avoid personal injury and damage to the speaker.

1. Set the speaker to the proper setting for your installation (25/70/100 V/8 ohm)

2. Install the top cover and fasten the provided eye-hook, nut and washer to the top cover and speaker as

illustrated below.

3. At each speaker location, route the speaker cable(s) hanging from the ceiling area through the top cover,

and dress the cables to the wire rope using plastic cable ties. If using a supplied back cover, slide the speaker

cables through the back cover. Strip the ends of the cables approximately 1/8" to 3/16" (3 mm - 5 mm) and if

the wire is stranded twist the strands.

4. Connect the wires from the amplifier (or the previous speaker) to the supplied terminal block, using the

IN terminal; red to + and black to –. Please refer to the following pages for examples of various types of

applications.

Attach the speakers to the safety cable (refer to page 6).

5. If mounting to the wall/ceiling with the mounting bracket, use the appropriate hardware and securely attach

the bracket to the ceiling/wall (refer to page 6).

NOTE: If the speaker is to be installed outdoors, you will need to purchase the optional accessories separately.

CVS-P Series Installation Guide V1.0