Cypress S6SAP413A 운영 매뉴얼 - 페이지 4

{카테고리_이름} Cypress S6SAP413A에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress S6SAP413A 19 페이지. 3ch buck dc/dc + 1ch buck/boost evaluation board

페이지 인쇄

Caution of the Products Described in this Document

The following precautions apply to the product described in this manual.

Electric shock,

Damage

Electric shock,

Damage

CAUTION

Cuts, Damage

Cuts

Damage

S6SAP413A, 3ch Buck DC/DC + 1ch Buck/Boost Evaluation Board

Arrow.com.

Downloaded from

Indicates a potentially hazardous situation which could result in death or serious injury and/or a

WARNING

fault in the user's system if the product is not used correctly.

Before performing any operation described in this manual, turn off all the power supplies to the

system.

Performing such an operation with the power on may cause an electric shock or device fault.

Once the product has been turned on, do not touch any metal part of it.

Doing so may cause an electric shock or device fault.

Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this

product or devices connected to it, or may cause to loose software resources and other

properties such as data, if the device is not used appropriately.

Before moving the product, be sure to turn off all the power supplies and unplug the cables.

Watch your step when carrying the product. Do not use the product in an unstable location

such as a place exposed to strong vibration or a sloping surface. Doing so may cause the

product to fall, resulting in an injury or fault.

The product contains sharp edges that are left unavoidably exposed, such as jumper plugs.

Handle the product with due care not to get injured with such pointed parts.

Do not place anything on the product or expose the product to physical shocks. Do not carry

the product after the power has been turned on.

Doing so may cause a malfunction due to overloading or shock.

Since the product contains many electronic components, keep it away from direct sunlight,

high temperature, and high humidity to prevent condensation. Do not use or store the product

where it is exposed to much dust or a strong magnetic or electric field for an extended period

of time. Inappropriate operating or storage environments may cause a fault.

Use the product within the ranges given in the specifications.

Operation over the specified ranges may cause a fault.

To prevent electrostatic breakdown, do not let your finger or other object come into contact with

the metal parts of any of the connectors. Before handling the product, touch a metal object

(such as a door knob) to discharge any static electricity from your body.

When turning the power on or off, follow the relevant procedure as described in this document.

Before turning the power on, in particular, be sure to finish making all the required connections.

Furthermore, be sure to configure and use the product by following the instructions given in

this document. Using the product incorrectly or inappropriately may cause a fault.

Because the product has no casing, it is recommended that it be stored in the original

packaging. Transporting the product may cause a damage or fault. Therefore, keep the

packaging materials and use them when re-shipping the product.

Operation Guide

, Doc. No. 002-08678 Rev. *A

Preface