Cypress CDM-600 운영 매뉴얼 - 페이지 5

{카테고리_이름} Cypress CDM-600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CDM-600 5 페이지.

Connection and Installation

The AC adaptor power unit should not be plugged into a wall outlet until all connections

are complete.

Using your connector cable connect the output (Number 5 on the rear panel) to your

output device (NTSC or PAL Video Recorder or TV).

Using your connector cable connect your input (Number 2 on the rear panel) to the

input device (Video cassette recorder either- PAL, NTSC or SECAM, satellite

receiver or a camcorder).

Choose either Auto or Manual as your input detecting mode switch. When in M-mode

(manual), set the switch to match the actual input signal type. (PAL, SECAM, NTSC

3.58, NTSC 4.43).

Once all connections are complete please connect the power supply provided to the

power socket (number 7 on rear panel).

Specifications

Input TV systems

Output TV systems

Connection terminals

Sampling frequency

Digital Cord Bit

Line Conversion

Field Conversion

Power Supply

Dimensions

Weight

Accessory

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,

Phone +61 249689313 Fax +61 249689314

www.converters.tv

NTSC 3.58, NTSC 4.43, PAL, SECAM

NTSC 3.58, PAL (B, D, G, I)

Video Input: 1

Video Output: 1

Y: 14.318 MHz

R-Y: 7.159 MHz

B-R: 7.159 MHz

Y: 8 bits

R-Y: 8 bits

B-R: 8 bits

525-625 lines

60-50 fields

DC 15 Volts 450 mA

(W) 236 mm X (D) 130 mm (H) X 45 mm

600g

One set of video/cable, AC adaptor