Dolmar 110i 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Dolmar 110i에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolmar 110i 19 페이지.

DOLMAR GmbH

03 Oil pump

03-02 Adjusting the oil pump delivery

Turn the screw:

clockwise

for less chain oil

anti-clockwise for more chain oil.

03-03 Checking the oil pump for wear

Unscrew the set screw (4) and check the

condition (5). Unscrew the guide bush (6) and

check the pump plunger (7) for damage.

Replace defective parts and clean the housing

prior to assembling.

03-03 Cleaning the intake pipe

Withdraw the oil filter (11) prior to cleaning the

intake pipe (10).

When installing the oil filter, pass the spring

over the intake pipe against the stop (arrow).

03-02 Removing the oil pump

Unscrew screw (1) and remove the pump

housing (2) from the crankcase. Separate the

intake pipe from the angular nipple (3).

03-04 Removing the intake pipe

Unscrew the chain guide plate (9) and

withdraw the intake pipe (10) from the oil

reservoir.

03-05 Withdrawing the worm

To remove the worm (8), screw the tool (12)

onto the worm against the stop. Withdraw the

worm from the crankshaft by tightening the

screw.

Caution: Use the protective cap!