Cypress CP-261D 운영 매뉴얼 - 페이지 2

{카테고리_이름} Cypress CP-261D에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CP-261D 4 페이지. Pc/hd to dvi format

The PC/HD to DVI-I format conveter converts analog

PC RGBHV/YPbPr signal to digital DVI signal.

It allows you to connect the analog HD-15 RGBHV/YPbPr output from your PC

or Video equipments to the DVI input of the monitors or projectors.

Its high bandwidth capability supports a wide range of PC and HDTV resolutions.

This package includes

- One CP-261D unit.

- One switching power supply adaptor.

- One HD-15 VGA to 3 RCA cable.

- User manual.

Features:

* It enables you to connect computers with analog PC output or

DVDs with analog HD output to digital DVI-I monitors or projectors.

* You can select input between analog RGB and YPbPr.

* You can also select output between Bypass or digital RGB.

* Supports up to 1600 x 1200 @ 60 Hz for PC input and 1920 x 1080p @ 60 Hz for HD input.

* Supports DDWG standard for DVI complaint monitors.

Operation Controls and Functions

Front Panel

PC/YPbPr INPUT

1. HD-15 D-Sub input: Connects to the PC or YPbPr output of your PC or YPbPr

source equipment, using VGA cable, or D-Sub to 3 RCA adaptor cable.

2. DC 5V power input jack.

3. Power LED light.

4. DVI-I output: Connects to the DVI input of your display TV through DVI cable.

5. Input format switch:

- Set the switch to YPbPr when the output format of your source equipment

is component YPbPr. Use VGA to 3 RCA adaptor cable to connect between

your source equipment and the CP-261D.

- Set the switch to RGB when the output format of your source

equipment is RGBHV. Use- HD-15 D-Sub VGA cable to connect

between your source equipment and the CP-261D.

Rear Panel

DC 5V 2A

DVI-I OUTPUT

INPUT

OUTPUT

YPbPr

Bypass

RGB