Ashly ne2400.10 운영 매뉴얼 - 페이지 10

{카테고리_이름} Ashly ne2400.10에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly ne2400.10 12 페이지. Network enabled two channel power amplifiers
Ashly ne2400.10에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지), 운영 매뉴얼 (16 페이지)

페이지 인쇄

Operating Manual - NE Two Channel Power Amplifiers

(DSP control tab continued)

Protea

Two Channel Amplifier DSP Control Surface (DSP option must be installed)

7) Pluggable Output DSP Tools - Output DSP tools are the same as those available to the inputs.

8) Output Mute Button - Mutes the output.

9) Output Channel Name - The user can name each output channel.

10) Output Channel Number - Right click on this to bring up Clear, Copy, Link, and Sub Preset functions for that output channel.

6. SPECIFICATIONS

GENERAL POWER AMPLIFIER SPECIFICATIONS

Power Output Per Channel

Stereo Mode, Both Channels Driven . . . . . . . . . . . . . . . . . . . . . . . . . . . . ne 800

8Ω , 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225W . . . . . . . . . .450W . . . . . . . . . 700W

4Ω , 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W . . . . . . . . . .800W . . . . . . . . . 1200W

Bridge Mode

8Ω , 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800W . . . . . . . . . .1600W . . . . . . . . 2400W

25V (ne 800 only), 70V, and 100V models . . . . . . . . . . . . . . . . . . . . . . 400W . . . . . . . . . .800W . . . . . . . . . 1200W

20Hz-20kHz 1%THD, per channel

Line Current Draw (both channels driven 4Ω /Ch, 120VAC Mains)

Line Current, Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA . . . . . . . . .165mA . . . . . . . . 200mA

Line Current, Idle (no signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475mA . . . . . . . . .500mA . . . . . . . . 475mA

Line Current, Typical (1/8 power pink noise) . . . . . . . . . . . . . . . . . . . . 2.81A. . . . . . . . . .4.95A . . . . . . . . . 6.75A

Line Current, Maximum (1/3 power sine wave) . . . . . . . . . . . . . . . . . . 4.93A. . . . . . . . . .8.80A . . . . . . . . . 12.6A

Thermal Dissipation (BTU/hr, both channels driven 4Ω /Ch)

BTU/hr, Standby mode, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 . . . . . . . . . . . .40 . . . . . . . . . . . . 40

BTU/hr, Idle (no signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 . . . . . . . . . . .109 . . . . . . . . . . . 109

BTU/hr, Typ (1/8 power pink noise) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 . . . . . . . . . . .447 . . . . . . . . . . . 682

BTU/hr, Max (1/3 power sine wave) . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 . . . . . . . . . . .466 . . . . . . . . . . . 717

Signal to Noise (20Hz-20KHz, unweighted) . . . . . . . . . . . . . . . . . . . . . . >107dB . . . . . . . .>110dB. . . . . . . . >112dB

Distortion (SMPTE, typical) - 8 ohm load, 10dB below rated power: . . . . . . . . . . . . . . . . .<0.5%

Distortion (THD-N, typical) - 8 ohm load, 10dB below rated power, 20Hz-20kHz:. . . . . . .<0.5%

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Hz-20kHz, +/-1dB

ne 1600

ne 2400