Cypress CMIR-44 운영 매뉴얼 - 페이지 7
{카테고리_이름} Cypress CMIR-44에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CMIR-44 12 페이지. 4 by 4 infrared matrix
Cypress CMIR-44에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)
7. Hardware Description
The following sections describe the hardware components of the unit.
7.1 Front Panel
1
2
IR sensor: To control the system.
q
POWER Button & LED: Press to turn the unit on or press it again to turn it to
②
standby mode. When the system is on the LED will be green, when in
STANDBY mode the LED will then be red.
IR IN 1 & output LED: Press the button to select which output IR signal will
③
be sent, the LED will then illuminate according to the selection.
IR IN 2 & output LED: Press the button to select which output IR signal will
④
be sent, the LED will then illuminate according to the selection.
IR IN 3 & output LED: Press the button to select which output IR signal will
⑤
be sent, the LED will then illuminate according to the selection.
IR IN 4 & output LED: Press the button to select which output IR signal will
⑥
be sent, the LED will then illuminate according to the selection.
3
4
3
5
6