Cypress CP-254 운영 매뉴얼 - 페이지 4

{카테고리_이름} Cypress CP-254에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CP-254 16 페이지. Dvi-d to dvi-i
Cypress CP-254에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)

1. Introduction

Cypress's CP-255I Scaler Box

video signal from Composite, S-Video, PC, Component (HD) and HDMI input

sources, to digital HDMI output of wide-range HDTV and PC resolutions, up

to 1080p and WUXGA (1920 x 1200.) Besides video upscaling, the scaler

box also converts digital/analog audio signal to digital format, then output

either through HDMI combining with the video, or Coaxial S/PDIF separately.

Cypress CP-255I has a comprehensive OSD menu that allows user to select a

variety of output resolutions and adjust for best picture quality.

1. HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.

2. Scales any PC (VGA ~ WUXGA) /HD (480i ~ 1080p) resolutions to/from

another PC/HD resolutions.

3. Automatically detect the factory setting of the connected display and

output the corresponding resolution and refresh rate, when the NATIVE

output is selected.

4. Supports 50/60Hz frame rate conversion.

5. Supports 3-D motion video adaptive, 3-D de-interlacing, and 3:2 / 2:2 pull-

down detection and recovery.

6. Provides output picture adjustment on contrast, brightness, hue, saturation,

sharpness, RGB (color tone) level, and aspect ratio size.

7. Supports high resolution input/output:

PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA

HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p

8. Supports digital and analog audio input and output.

1. Cypress CP-255I Scaler Box

2. D-Sub (15pin) Cable

3. 3XRCA Cable (Composite Video + L/R Audio)

4. Remote Controller

5. 5VDC Power Supply Adaptor

6. Operation Manual

is designed to upscale digital/analog