Ashly Protea NE4250.70 운영 매뉴얼 - 페이지 11

{카테고리_이름} Ashly Protea NE4250.70에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly Protea NE4250.70 16 페이지. Network enabled multi-channel power amplifiers
Ashly Protea NE4250.70에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (16 페이지), 사양 시트 (2 페이지), 사양 (2 페이지), 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (20 페이지), 운영 매뉴얼 (20 페이지)

페이지 인쇄

Operating Manual - NE Multi Channel Power Amplifier

using Ethernet instead of the Data Port to communicate with the amplifier. Connecting and powering the neWR-5 is done using

Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch, hub, or in-line PoE injector. If PoE is unavailable,

the Ashly RPS-18 (sold separately) is a 15-48VDC power supply capable of at least 2 watts per neWR-5 and can be hard wired

to the back of the neWR-5. PoE current draw is 38mA @48VDC and 80mA@15VDC. A decora cover plate (not included) can

be purchased at hardware stores to cover the neWR-5 electrical box and satisfy the aesthetic needs of the installation.

The neWR-5 appears in the Protea

a specific amplifier under control. The neWR-5 has six programmable function buttons which can light up green, red, or amber

to display status. Further information on LED status is found in the neWR-5 owner's manual. To the right of the function but-

tons is a pocket in the mylar overlay for a printed function label to be inserted. The two other buttons are used to adjust function

parameters such as gain or preset number, and are indicated by the LED display. As with the WR-5, neWR-5 functions are limited

without DSP installed in the amplifier. Note: To use the neWR-5 as a remote level control, a (ne)WR-5 Remote Gain tool must

be placed in one of the DSP processing blocks of the channels(s) to be controlled. presuming that amplifier has DSP installed.

There is a hard-wired Lock-Out feature on the neWR-5, where the closing of a switch wired to the lockout Euroblock

renders all buttons inactive.

INA-1 Inline RS-232 Adapter - The amplifier Data Port uses a proprietary serial communications protocol which can

be converted to RS-232 using the Ashly INA-1 RS-232 adapter. This allows the use of custom designed third party RS-232

controllers.

5. PROTEA

SOFTWARE

Protea

software offers a comprehensive suite of tools for controlling Ashly NE multichannel amplifiers as well as other

Ashly products. The standard NE multichannel amplifiers allow for ethernet control and monitoring of power functions, level,

mute, and polarity. With the DSP option installed, software control and monitoring of major audio functions can be custom

configured on a per channel basis, as well as through linked channels. More in depth discussion of software features can be

found in the Protea

software online help.

software device menu tree and must be assigned, within its neWR-5 device window, to