Ashly SRA-2075 운영 매뉴얼 - 페이지 7
{카테고리_이름} Ashly SRA-2075에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly SRA-2075 12 페이지. Sra series standard power amplifiers
Ashly SRA-2075에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지), 브로셔 및 사양 (4 페이지), 사양 시트 (2 페이지), 사양 시트 (2 페이지)
페이지 인쇄
Operator Manual – SRA Series Amplifiers
Typical Applications
The most common use of a SRA-Series amplifier is a 2-channel source driving 2 speaker
channels. In this illustration, the 4-channel amplifier is receiving two stereo signals and is
driving two pairs of stereo speakers The amplifier is in STEREO mode.
SRA-Series amplifiers are well suited to BRIDGED operation to drive a speaker load such
as a subwoofer or a more powerful stereo output on a 4-channel model. This illustration
shows a 4-channel SRA driving a Stereo signal in BRIDGED mode.
Connectors & Polarity
SRA-Series amplifiers utilize two types of professional audio connectors. For the inputs 3-
pin Euroblock connectors are utilized with their polarity clearly marked on the amplifier's
rear panel. Outputs are via screw terminal connectors. The polarity for these connectors is
also clearly marked on the unit's chassis. However, polarity changes when the unit is
operated in BRIDGED mode. Be sure to read the Operation section of this manual for
important information on the two operating modes.
All Rights Reserved
Page - 7
Important Safety
Instructions – 2
Introduction - 3
The SRA Series - 4
Physical Description - 5
Installation – 6
Requirements
Typical Applications
Connectors & Polarity
Operation - 8
Troubleshooting - 9
Spec Table - 10
Dimensions - 11
Warranty - 12