Ashly XR-1 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Ashly XR-1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly XR-1 9 페이지. Powercard amplifier input options
Figure 4: CL-2 connector locations
XR-1 TWO-WAY CROSSOVER ...........................................
Figure 6: XR-1 crossover input option
The XR-1 two-way 24 dB/octave active crossover places one of the most
commonly used pro audio tools within one of the best power amplifiers on the market.
The XR-1 uses fixed-frequency filters and recessed controls for the ultimate in "set
and forget" crossover
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Ashly POWERCARD Owners Manual
flexibility, the nature of this product suggests using two fixed-frequency cascaded
butterworth response filters for each output. The low output includes an 18dB/oct.
20Hz hipass filter to reduce subsonic signal. The high output includes 360° of phase
control for driver alignment as well as two types of CD horn EQ. A single eight pin
SIP (single in-line package) resistor network selects the frequency for each filter.
Normally both the high-pass and low-pass filters are tuned to the same frequency, so
one value SIP is used for both filters. Installation of the resistor networks requires no
soldering - simply plug them in their respective 8 pin sockets as shown in figure 6.
variety of crossover/amplifier configurations (see figure 5). Mode 1 simply forwards
the high crossover output to amplifier channel one and the low output to channel two.
In Mode 1A, you can replace the high output with a full range signal by depressing
the Highpass/Full Range switch. Full range speaker cabinets are connected to channel
one while channel two drives additional subwoofers for those applications requiring
extended bass. The high level control becomes full range, while phase and CD Horn
EQ are removed from the audio path. Caution: never send full range audio into a
high frequency driver! To prevent a stray hand from inadvertently switching your
horn to full range, the button for this control is shipped seperately in the bag with the
resistor networks.
Figure 5: XR-1 Output Modes
Page
6
Ashly POWERCARD Owners Manual
applications. While our rack-mount crossovers use state-variable filters for
The XR-1 comes equipped with output mode switching, enabling you a wide
Page
7