Ashly MX-508 운영 매뉴얼 - 페이지 3

{카테고리_이름} Ashly MX-508에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly MX-508 12 페이지. 8-channel, mic/line mixer
Ashly MX-508에 대해서도 마찬가지입니다: 기술 노트 및 사양 (2 페이지), 운영 매뉴얼 (12 페이지), 운영 매뉴얼 (16 페이지), 사양 시트 (2 페이지)

페이지 인쇄

1. INTRODUCTION

Congratulations on your purchase of an Ashly

508 stereo mixer . In one compact rack-mount package we

have combined features, reliability, and sonic performance

found only in larger and more expensive mixing consoles .

This third generation mixer utilizes a universal 100-240VAC

switching power supply, and adds a 3 .5mm front panel stereo

line input jack .

Other features include output mute switches, dual jack

insert points, switchable +48V phantom power, and front

panel switching on each channel selecting between mic or

line input . Three-band equalization with a fixed frequency

low and high shelf and a tunable mid-range control provides

perfect true-reciprocal equalization curves . A concentric level

and pan control combined with a concentric pair of auxiliary

sends complete each input channel .

Ultra low-noise summing amplifiers combine the

channel signals for the main and send outputs . Two 10-segment

LED arrays monitor main or aux outputs . Standard line level

outputs on 1/4" connectors, stereo pre-fader line outputs on

RCA connectors, and transformer isolated 600 ohm outputs on

XLR connectors are provided as standard equipment . Ashly

still uses professional quality 16mm metal shaft potentiometers

on all controls for greater accuracy and long life .

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated "dangerous voltage" within

the product's enclosure that may be of

sufficient magnitude to constitute a risk

of electric shock to persons.

THIS APPARATUS MUST BE EARTHED

Operating Manual - MX-508 Stereo Microphone/Line Mixer

MX-

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-

MOVE COVER. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,

DO NOT EXPOSE THIS APPlIANCE TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE, REPLACE ONLY WITH

SAME TYPE FUSE. REFER REPLACEMENT TO QUALI-

FIED SERVICE PERSONNEL.

WARNING:

2. UNPACKING

As a part of our system of quality control, every Ashly

product is carefully inspected before leaving the factory to

ensure flawless appearance . After unpacking, please inspect

for any physical damage . Save the shipping carton and all

packing materials , as they were carefully designed to reduce

to minimum the possibility of transportation damage should

the unit again require packing and shipping . In the event that

damage has occurred, immediately notify your dealer so that

a written claim to cover the damages can be initiated .

The right to any claim against a public carrier can be

forfeited if the carrier is not notified promptly and if the

shipping carton and packing materials are not available for

inspection by the carrier . Save all packing materials until the

claim has been settled .

3. AC POWER REQUIREMENTS

The MX-508 mixer will perform normally from 100

to 240 volts AC, 50-60Hz . Use only properly grounded

AC receptacles . To reduce the risk of ground loop hum, use

a central point for system AC power distribution . Power

consumption is less than 50 watts .

The exclamation point within an eqilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance instructions in the literature

accompanying the device.