Ashly 2.24PS 운영 매뉴얼 - 페이지 15

{카테고리_이름} Ashly 2.24PS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly 2.24PS 20 페이지. Two/four channel graphic/parametric equalizer/system processor, full function graphic equalizer remote control
Ashly 2.24PS에 대해서도 마찬가지입니다: 기술 노트 및 사양 (2 페이지)

Ashly 2.24PS 운영 매뉴얼

7. MIDI IMPLEMENTATION

***NOTE! Read this section before using several Protea units controlled from a Master or Remote.
7.1 MIDI AND THE 4 BANKS
There are 16 MIDI channels, and any local channel in a Protea system may be independently set to any one of
the 16 MIDI channels. This is how 16 different audio channels are controlled from one remote or master.
On the remote/master:
Bank A is MIDI Channels 1 - 4
Bank B is MIDI Channels 5 - 8
Bank C is MIDI Channels 9 - 12
Bank D is MIDI Channels 13 - 16
MIDI messages in a Protea system are transferred in a closed-loop system, and all commands are verified.
Only one command can be executed at a time throughout the entire system. Note: When a Protea 4.24G is selected as
the Master (via UserPrefs menu), it's 4 channels are ALWAYS automatically set to MIDI Channels 1 - 4.
The pop-up message "Unit Not Responding" is displayed whenever the user selects a Bank or Channel key for which
there is no physical channel with that MIDI channel assigned.
When a parameter is changed from the remote, a system message is transmitted to the selected MIDI channel,
stating which parameter to change, along with it's new value. ALL Protea system channels set to that MIDI channel
will respond accordingly. Note: Simultaneous adjustments made on a 4.24G main unit and 4.24RD remote control will
be treated as "first come, first served" in that the earliest entered command from either unit has priority.

7.2 SELECTING THE MIDI CHANNELS

From within the second screen (MORE) of the menu keys, press the MIDI option. This will bring you into the
main MIDI screen. At the top of the display you will see "Local Chan = 1 2 3 4", representing the audio channels
within that physical Protea unit. Underneath that line, you will see "MIDI Chan = " and then four numbers. This
represents the MIDI Channel assigned to the local channel displayed directly above it. To change the MIDI Channel,
use the keys directly below each fader graphic for that channel.
Note: The top step on the MIDI Channel Fader is "OFF". When a Protea Channel is set to OFF, it will not be
affected by any Midi messages on any channel.
We suggest that unless you require unusual mapping of the MIDI Channels in your system, that you match the
MIDI Channels in the units as shown below.
Protea 4.24G #1 = Audio channels 1 - 4 (Bank A)
MIDI Channels 1 - 4
Protea #2 = Audio channels 5 - 8 (Bank B)
MIDI Channels 5 - 8
Protea #3 = Audio channels 9 - 12 (Bank C)
MIDI Channels 9 - 12 (2nd slave)
Protea #4 = Audio channels 13 - 16 (Bank D)
MIDI Channels 13 - 16 (3rd slave)
Operating Manual - PROTEA SYSTEM II Digital Audio Products
(Master - automatically assigns MIDI Channels 1-4 when selected as Master)
(1st slave)
Also Note:
15