Ashly MQX-2150 운영 매뉴얼 - 페이지 7
{카테고리_이름} Ashly MQX-2150에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly MQX-2150 16 페이지. Miniature 15-band graphic equalizer
Ashly MQX-2150에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 기술 노트 및 사양 (2 페이지), 운영 매뉴얼 (12 페이지), 기술 노트 및 사양 (2 페이지)
페이지 인쇄
Operating Manual - MQX-2310, MQX-1310, and MQX-2150 Graphic Equalizer
Input
Chassis
Ground
Ground
(-)
(+)
(-)
Channel One
Input
Chassis
Ground
Ground
(-)
(+)
(-)
Channel Two
6.3 Grounding
The terminal strip has two ground connections,
one for input ground and one for chassis ground. The
equalizer is shipped with a jumper strap connecting these
two grounds. Normally, this strap should be left in place
so the chassis and input grounds are connected. In a rack-
mount installation where the equalizer is connected to
other equipment with unbalanced inputs or outputs and
the rack itself provides a good electrical connection be-
tween the equalizer chassis and the other equipment, it
may be desirable to remove this strap to isolate the input
ground from chassis ground and avoid a ground loop.
Unless you have such an installation and have a hum prob-
lem you can't solve by other means (ie: using balanced
input and output connections), leave the ground jumper
strap in place.
Output
hannel One
Output
(+)
Output
(+)
3
2
1
(+)
(-)
3
2
1
Input is 20K active balanced.
Output may be wired balanced
or unbalanced. Maximum in/out
level is +22dBu.
(+)
(-)
Balanced
Input
Channel Two
Output
7