Ashly Protea System II 2.24PS 운영 매뉴얼 - 페이지 12

{카테고리_이름} Ashly Protea System II 2.24PS에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly Protea System II 2.24PS 20 페이지. Two/four channel graphic/parametric equalizer/system processor, full function graphic equalizer remote control
Ashly Protea System II 2.24PS에 대해서도 마찬가지입니다: 기술 노트 및 사양 (2 페이지)

페이지 인쇄

Operating Manual - PROTEA SYSTEM II Digital Audio Products

400 630

1.6K 2.5K 4K 6.3K 10K 16K

15 500 800 1.2K 2K

3.1K 5K

8K 12K

1.2K

1.6K

2.5K

5.7 SAVE

To permanently store the settings of the current channel to a preset, press SAVE. The screen first prompts for

a preset number, defaulting to the currently loaded preset. Numerical entry can be done with the up/down keys or by

typing in numbers on the keyboard.

Pressing SAVE a second time prompts for the user to give the preset a name, although it is not required. Text

can be either upper or lower case, and is toggled with the CapsLock key. Pressing SAVE a third time writes the current

settings, preset name, and preset number to memory.

5.8 FLAT

In the EQ screen, pressing the FLAT key quickly returns all faders to 0dB for beginning a new EQ curve.

(Individual EQ frequencies can be "zeroed" by pressing both up and down keys simultaneously.) In the HPF/LPF

screen, the FLAT key resets the two filter frequencies to "off".

5.9 COPY

To quickly copy the settings of the current channel to another channel, press the COPY key. You will be

prompted to enter a target channel. Press the desired Channel number key (and perhaps the Bank key, if applicable)

that you want to copy to, then press COPY again to execute the copy, or ESC to exit.

Note: The new channel which was copied to becomes the current channel, and although the new channel's

preset name and number remain the same, the audio settings are now that of the channel from which the copy was just

made. Unless it is saved however, no permanent changes are made to the preset formerly loaded to the new current

channel. This feature is an easy way to copy settings from one channel to another without changing the preset name.

5.10 IN/OUT

Each of the four audio functions in the first menu (EQ, Limiter, HP/LPF, & Delay) can be switched in or out inde-

pendently of one another. The IN/OUT key will only affect the audio function selected on the current channel's menu.

5.11 MUTE

Local Mute: The MUTE key turns off the currently selected local channel. A red LED is lit to the right of

any channel which has been muted. If local channels are linked together, pressing MUTE on the dominant channel

will also mute the dependent channels. Local mute overrides a system mute

Remote Mute: Any MIDI channel can be muted from the remote control. Because of the limitations of MIDI

however, only the Current Channel can display its mute status. The other three channels' mute LEDs will remain off

on the remote, even if those channels are locally muted. This also applies to a 4.24G used as a Master device (Banks

B-D).

Slave Mute: Slave channels can be muted through external control, and indicate mute status by flashing the

MIDI Channel display on and off for the muted channels.

Help

+15

+10

Recall

0dB

-5

Flat

-10

-15

GAIN

In/Out

3.1K

6.3K

Esc

Save

Digital Audio Products

SYSTEM II

4.24G

Copy

Mute

10K

12K

16K

Scene

CapsLock

Gain