Ashly FR-16 운영 매뉴얼 - 페이지 4

{카테고리_이름} Ashly FR-16에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly FR-16 12 페이지. Fr remotes network remote controls
Ashly FR-16에 대해서도 마찬가지입니다: 운영 매뉴얼 (17 페이지), 제품 사양 (2 페이지)

페이지 인쇄

Operating Manual - FR-8 and FR-16 Remote Level Controller

3. FR Firmware Update (Flash Reprogram)

To view the current FR firmware revision, click on it's control surface Network Properties

tab and look under Hardware Configuration. If a newer firmware update is available on the Ashly

website, the user may download it and run the Flash Reprogram procedure found in the FR Device

Options menu. If the control surface is somehow unable to communicate with the FR device due to

a corrupt internal program, run flash reprogram from the main Protea

grammer/Launch Flash Reprogram. This requires the FR device MAC address, found on the back

panel. When the FR device is put into flash reprogram mode, the highest channel LED turns green

and Master LED turns amber. All control function is suspended until reprogramming is completed

4. Protea NE Software

Protea NE Software version 5.10 or greater is required for the FR Remotes. Load it from the

supplied CD or Ashly website to a PC running Microsoft®

Windows 7/Vista/XP, 32 & 64 bit.

Network Tree - Start Protea NE Software and the

FR-8/16 should appear in the network tree in the "Ashly

Remotes" folder. From the factory, it should appear with

the name "FR-8 (or 16) Fader Remote" in green. If it

doesn't appear, click the "Scan For Devices" button under

the network tree. All devices continuously broadcast their

availability to the software. All currently connected and

active products are highlighted in green, while products

which have been formerly connected but are currently

off-line or unavailable show up in red. To clear the network tree of all unavailable (red) items, right

click the top level item (Ashly Network) and select <Clear Inactive Devices In All Groups>.

Project Canvas - To configure the FR-8/16, double-click its icon in the network tree, which

brings up that FR-8/16's control surface. Alternatively, drag the icon from the network tree onto the

project canvas and double-click it there. Drawing elements such as lines, rectangles, text, and image

files can be added to the canvas to complete a visual control screen displaying all Ashly devices

under control, which is then saved as a project file. Drawing elements are found as icons above the

canvas. To add text or image files, right click over empty canvas. The saved project file contains all

devices, settings, and drawing elements shown on the project canvas.

Once an image has been placed on the canvas, it must be manually deleted if that device is no

longer available to the software. Scanning for devices does not automatically remove images which

may have been installed at one time but are now off line. To clear the canvas of all devices and

drawn elements click <File - New>.

Design Mode - Design Mode must be enabled to work with devices or drawing elements in

the project canvas. Right-click on canvas to enable Design Mode. This allows placed objects to be

moved around, while unchecking Design Mode locks objects in place and prevents the addition of

other objects or devices. Further help is available in Protea NE software by navigating through the

online help menu.

window under Flash Pro-