Ashly FR-16 운영 매뉴얼 - 페이지 7

{카테고리_이름} Ashly FR-16에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly FR-16 12 페이지. Fr remotes network remote controls
Ashly FR-16에 대해서도 마찬가지입니다: 운영 매뉴얼 (17 페이지), 제품 사양 (2 페이지)

페이지 인쇄

Operating Manual - FR-8 and FR-16 Remote Level Controller

5. Other Features

Front Panel Lock-Out

When unintended or unauthorized changes to the faders or buttons must

be prevented, a keyed switch or contact closure can be connected to this Euro-

block connector. When the two pins are unconnected, the front panel operates

normally. When connected via a switch or contact closure, physical changes

on the front panel are locked out and ignored by software. Note: Before un-

locking the front panel, it is suggested that all faders first be placed fully down

or at pre-determined marked levels to avoid excess volume. Lock-out status is

indicated in software in the main control surface fader test tab window.

Factory Reset

If it is necessary to restore the FR remote to it's factory default settings, follow these steps:

1. Remove power from the FR-8/16.

2. Press and hold down buttons 5, 6, 7, 8 on the FR-8, or

buttons 9, 10, 11, 12 on the FR-16.

3. Apply power to the FR-8/16.

4. Release the held buttons after all the buttons glow amber.

Security

In addition to the hardware lockout, there are multiple user/multiple levels of FR-8 and FR-16

software protection assignable within the security tab. The security data is stored within the FR

remote device itself, not Protea NE Software. Passwords are case sensitive. Be sure to write down

the password and store in a convenient place for future reference. Note that device security is differ-

ent than the target security, and is located next to the main control surface configuration window tab.