Ashly FR-8 제품 사양
{카테고리_이름} Ashly FR-8에 대한 제품 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly FR-8 2 페이지. Fr remotes network remote controls
Ashly FR-8에 대해서도 마찬가지입니다: 운영 매뉴얼 (17 페이지), 운영 매뉴얼 (12 페이지)
페이지 인쇄Hand-built in
5-Year Warranty
Webster, NY
FR
REMOTES
FR-8 and FR-16 are Ethernet devices that provide fader-based
remote level control for Ashly products having DSP capa-
bilities. The FR-8 controls up-to eight user assigned inputs,
outputs, or mixer outputs, and the FR-16 controls up-to 16.
Both models are powered using Class-2 IEEE 802.3af Power
over Ethernet (PoE), or by an external PoE injector when
PoE is unavailable. Ethernet communication with this device
is made by wiring it with standard Cat-5 cable terminated
with an RJ-45 connector through an Ethernet network router,
switch, hub, or patch panel to a Windows™ PC running
our Protea™ ne Software v5.10 or higher. Each connect
to Ethernet using a standard RJ-45, as well as Neutrik's
etherCON™ heavy duty RJ-45 and will automatically assign
their IP address.
Each channel fader can control input gain, output gain, or
mixer gain levels as assigned in software. The master fader
provides an overall level control for user assigned faders, or
can be disabled. Assignable fader scaling allows the user to
place an upper and lower limit on the range of level control
for each individual fader. A clear window is provided above
and below each fader for the insertion of user defined labels,
available on the Ashly website as a document template.
The FR-8 will mount to a standard 4-gang US electrical
wall box, and the FR-16 will mount to a modular 7-gang
US wall box. Alternately, the units can be mounted to a
flat surface with a cutout, or can be used as a freestanding
desktop device. On the rear panel, a Euroblock contact
closure can be connected to a keyed switch to lockout
all front panel controls, preventing any unwanted changes.
Ashly Audio, Inc.
|
847 Holt Road
|
Webster, New York 14580-9103 USA
©2014 All features, specifications and graphical representations are subject to change without notice. Ashly Audio is a division of Jam Industries, Ltd. DS-1 1213
Compatible Ashly Products
Power Amplifiers
nXp Power Amplifiers
PEMA™ Protea-Equipped Media Amplifiers
ne Series, Two-Channel Power Amplifiers w/ DSP
ne Series, Multi-Channel Power Amplifiers w/ DSP
Signal Processors
ne Series, DSP Processors 4400/4800/8800
ne24.24M Matrix Processor
Indicator Functions
BLUE LED
Power
Push-Button LEDs (Mixer Mode & I/O Level Mode)
RED
Mute
GREEN/AMBER
Signal Level
Push-Button LEDs (A/B Source Select Mode)
RED
Source "A"
GREEN
Source "B"
Please Note: 1) Level and Mute indicators are disabled in A/B
Source Select Mode. 2) Continuous flashing RED in either mode
indicates communications with the target device has been
interrupted.
|
US toll free: +1-800-828-6308
|
tel: +1-585-872-0010
N
r
etwork
emote
Specifications
Common
Max Data Cable Length
Connections
Environmental
Power Requirements
FR-8
Mounting
Dimensions
Unit Weight
Shipping Weignt
FR-16
Mounting
Dimensions
Unit Weight
Shipping Weight
|
fax: +1-585-872-0739
|
C
oNtrols
100 meters (328 ft) from the
nearest router, hub, or switch
Euroblock, XLR male
40–120 deg. F (4–49 deg, C)
Class 1 IEEE 802.3af
Power over Ethernet (PoE)
4-ganged wall box (US), panel
cutout, desktop
9"W x 4.8"L x 0.9"D
(229mm x 122mm x 23.9mm)
2.3lbs (1.04kg)
4lbs (2kg)
7-ganged modular wall box (US),
panel cutout, desktop
15" W x 4.8" L x 0.9" D
(381mm x 122mm x 23.9mm)
3.8lbs (1.72kg)
5lbs (3kg)
|
|
www.ashly.com