Ashly ne4800 사양

{카테고리_이름} Ashly ne4800에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly ne4800 3 페이지. Network enabled dsp processor
Ashly ne4800에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 운영 매뉴얼 (20 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

Signal Processors

NE Series

ne4400 | ne4800 | ne8800 System Processors

Connecting and controlling an audio processor for networked systems has

now been simplified with Ashly's NE-Series ne4400, ne4800 and ne8800 digital

signal processors. These Network Enabled (NE) processors offers ease of use,

setup and control using standard 10/100 Ethernet protocol and Protea NE

Software. No special outboard control units are needed.

Standard units are analog line input/output format of 4x4 (4400), 4x8 (4800),

and 8x8 (8800) with four option bays supporting network audio, AES/EBU, and

mic input options. The DSP signal processing library is extensive and utilizes

multiple SHARC 32-bit/96kHz processors with sample rates of either 48 KHz

or 96 KHz. Processing blocks include an 8x8 matrix mixer, a full array of vari-

able Q graphic and parametric equalization, crossover filters to 8th-order

Butterworth, Bessel, Linkwitz, and Notched-Linkwitz, an extremely advanced

automatic feedback suppressor, autolevelers, compressors, matrix duckers,

limiters, frequency-keyed noise gates, time delay up to 1365 ms on every

channel, sinewave, pink noise, and white noise generators.

All programming is accomplished using standard 10/100 Ethernet or RS-232

protocol and Ashly's Protea NE Software on a PC platform. Hot-plug software

control allows you to plug any function into any channel block even when

running live audio with no latency or recompiling necessary. Automatic

DHCP network IP configuration reduces network set up time. No front panel

controls and multi-level software security with password access assures you a

tamperproof audio system.

Additional features include: network audio routing at matrix mixer to inputs

from outputs, or in/out of matrix mixer, 8 link groups on most functions, auto-

matic master clock switchover between network, word clock, AES/EBU, and

internal clock, a high-performance analog audio path – dynamic range

exceeding 114 dB, support of Ashly digital remote controls, programmable 8

channel 5V logic input or output control, 8 channels of 0 to 5V analog level

control, word clock input and output and a front panel full meter bridge with

mute keys.

Available hardware options are: 4-channel mic/line input option with soft-

ware controllable gain and phantom power, CobraNet network audio input

and output, EtherSound network audio input and output, AES/EBU digital

audio input and AES/EBU digital audio output.

NE Series specifications

Features:

• Three models - 4x4, 4x8, and 8x8

format

• Optional mic inputs, CobraNet,

EtherSound, AES/EBU

• 10/100 Ethernet and RS-232 com-

puter interface Is standard

•

Extensive DSP Available

• Easy and intuitive user interface

• 24-bit A/D–D/A audio resolution

• 32-bit SHARC DSPs

• Sample rates of 48 KHz and 96 KHz

• Hot-plug software control

• Automatic DHCP network IP configu-

ration

• Butterworth, Bessel, Linkwitz, and

Notched-Linkwitz filters

• Advanced automatic feedback sup-

pression

• Word clock input and output

• Euroblock connectors for audio,

preset recall, DC remote level

control and data in/out

• Six dedicated remote controls

for Level, Logic I/O and Program-

mable Functions

• Third party control friendly

• Input and output metering

• Multi-level Security

• Five year worry-free warranty

Rear panel:

•

10/100 Ethernet port

• RS-232 port

•

Euroblock inputs

•

Euroblock outputs

• Four option bays

• Word clock in and out

• Remote level control

•

Logic I/O

•

Data in and out ports

• On/off switch

Accessories

• WR-1 2-ch Level Control

• WR-2 Four Position Switch

• WR-5 Programmable Wall Remote

• RD/RW8C 8-ch Level Control

• neWR-5 Network Programmable Remote

• neRD-8/16 Network Fader Remote