Cypress CA-DVI100R 운영 매뉴얼 - 페이지 5
{카테고리_이름} Cypress CA-DVI100R에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CA-DVI100R 12 페이지. Dvi over cat5 receiver box
Cypress CA-DVI100R에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지)
페이지 인쇄
5. Features
Compliant with HDMI 1.2, and DVI 1.0 specifications.
Support Equalizer, and Gain adjustment.
Supports high definition input up to 1080P/WUXGA, output resolution
follows input.
Easy to install and simple to operate.
Connect CAT 5 back to DVI without signal loss after 100 meter's
transmission.
Not compatible with HDCP Source.
Build-in EDID at transmitter.
Support both external Coaxial and Stereo Sound.
6. Operation Controls and Functions
6.1 Transmitter's Front Panel
DVI to CAT 5 / TRANSMITTER
① DVI-D IN – Plug from DVI/HDMI source equipment ' s video output with DVI
in cable.
② COAX IN – Plug from DVI/HDMI source equipment ' s audio output with
coaxial cable.
③ L/R IN – Plug from DVI/HDMI source equipment ' s audio output with L/R
phone jack cable.
④ AUDIO switch – Switch your audio source by COAX in or L/R in.
Note: 1.When Coax-in's audio format is bitstream (AC3, DTS and....etc.)
Coax-out will perform the some format, but L/R out will perform no
sound therefore, audio source format will need to be change to
LPCM in order to get L/R out to perform.
2.When inputing HDMI Source with audio signal throug HDMI to
DVI-D adaptor and output DVI-D with DVI-D to HDMI adaptor, the
audio will remain with HDMI instead of COAX or L/R IN.
DVI-D
IN
1
COAX
L/R
IN
IN
2
3
2
COAX
L/R
AUDIO
4