Cypress CE217646 매뉴얼

{카테고리_이름} Cypress CE217646에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CE217646 20 페이지. Ble wireless power transfer with psoc 6 mcu with ble connectivity

페이지 인쇄

Objective

This example demonstrates the Wireless Power Transfer service in the Power Transmitter Unit and Power Receiver Unit role.

Overview

The design demonstrates the Wireless Power Transfer Profile operation of the BLE Component. The example consists of two

projects: the Wireless Power Transmitter (GATT Client) and Wireless Power Receiver (GATT Server).

This example demonstrates the communication between Power Receiver Unit (PRU) and Power Transmitter Unit (PTU) in the

Wireless Power Transfer systems. The PTU Central device supports connection with up to four PRU Peripheral devices. The

PRU simulates the power receiver data and reports the simulated data to a PTU using the Wireless Power Transfer Service

(WPTS).

Requirements

PSoC Creator™ 4.2

Tool:

Programming Language: C (Arm

Associated Parts: All

PSoC 6

Related Hardware:

CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit

Hardware Setup

This example uses the kit's default configuration. Refer to the

Connect the BLE Pioneer Kit to the computer's USB port.

Connect the BLE Dongle to one of the USB ports on the computer.

LED Behavior

If the V

voltage is set to less than 2.7 V in the DWR settings System tab, only the red LED is used. The red LED blinks to

DDD

indicate that the device is advertising. The red LED is OFF when a device is connected to a peer device. When the device is in

Hibernate mode, the red LED stays ON.

LED behavior for V

Voltage > 2.7 volts is described in Operation section.

DDD

Software Setup

BLE Host Emulation Tool

This example requires the CySmart application. Download and install either the

the CySmart app for

iOS

or Android. You can test behavior with any of the two options, but the CySmart app is simpler. Scan

one of the following QR codes from your mobile phone to download the CySmart app.

www.cypress.com

CE217646 - BLE Wireless Power Transfer

with PSoC 6 MCU with BLE Connectivity

GCC 5.4-2016-q2-update)

BLE parts

iOS

Document No. 002-17646 Rev.**

kit guide

to ensure the kit is configured correctly.

CySmart Host Emulation Tool

PC application or

Android